UK construction blog

Archive

Archive for September 26th, 2014

Comparison of Galvanized Steel with Stainless Steel

September 26th, 2014 Comments off

Comparison of Galvanized Steel with Stainless Steel

By:  Jake Hyet

Even though both galvanized steel and stainless steel are technically steel, they are very different from each other and have many different applications.  It is important that you know the difference, particularly when you have to decide which material to use for a home improvement or construction project.  Here is an explanation of what each steel is composed of and their uses.

Uses for Galvanized Steel

Galvanized steel is frequently used for home construction projects.  It is also commonly used in framing homes.  Nails, nuts and bolts are made from galvanized steel.  You may not know this, but it is also an established and commonly used choice for ornamental fencing.  What people believe is iron fencing is often really galvanized steel tubing.  It is frequently preferred due to its capability to resist rust.  Galvanized Metro Steel has many uses outside of the home and garden too.  It is used to frame heavy-duty vehicles such as trucks and buses, and parts of it are even used in automobiles and commercial construction vehicles.

Because of its rust-resistant properties, galvanized steel is also used in household appliances that may be exposed to water and therefore more easily corroded, such as washing machines and dish washers.

When Not to Use Galvanized Steel

Galvanized Metro Steel does have a variety of uses, but it is not the answer to every job.  It is usually the perfect choice in situations where there may be exposure to water, but it performs badly when exposed to salt water.  What happens is that the salt turns the zinc coating ineffective and down the road will leave you with a rusted product.  Also, galvanized steel nails shouldn’t be used when building cedar fencing.  The zinc coating reacts to a naturally occurring enzyme found in the cedar, and gradually this will cause black stains to run from the nail down the length of the cedar picket.

Uses for Stainless Steel

Stainless steel is the primary metal used in construction.  It is used often for building applications because of its strength and ability to resist rust.  Skyscrapers are framed with it and homes are built with it.  Also, it is used to make pipe for building and plumbing.  It is used for most hardware, saw blades and hand tools. The list of its uses could go on and on.

A Stainless Metro Steel sheet is an excellent material to use in marine environments as well.  It doesn’t rust and holds up well in wet and salty environments.  It makes up the mechanics and exteriors of household appliances, and most cutlery is made from it.

When Not to Use Stainless Steel

Stainless steel should not be used when any two pieces have the potential to rub together.  The reason is that friction can break down the oxide layer of the steel and the pieces could actually weld together.  Also, stainless steel is a bad choice if there is the possibility of exposure to chlorine.  Chlorine will eat through the oxide layer of stainless steel, thus leaving it no longer rustproof.  For this reason, a Stainless Metro Steel sheet or any other should never be cleaned with a solution that contains chlorine bleach.

 

 

Biography:  Jake Hyet is considered an expert on virtually anything to do with steel, having worked for various steel companies and had experience with both Galvanized Metro Steel, and Stainless Metro Steel sheets.

 

Link To This Page
1. Click inside the codebox
2. Right-Click then Copy
3. Paste the HTML code into your webpage
codebox
powered by Linkubaitor
Tags:

First packages up for grabs on £1.2bn Shell Centre

September 26th, 2014 Comments off

canary-wharf-Canary Wharf Group is starting the hunt for package contractors on its massive redevelopment of the Shell Centre site on London’s South Bank.

The move comes despite an ongoing legal challenge against the scheme which has delayed the start of construction.

Canary Wharf Group is construction manager on the project and joint development manager with Qatari Diar.

The scheme was approved by Communities Secretary Eric Pickles in June but is now facing a legal challenge by a lone objector.

The High Court challenge is due to be heard in December but the developers are confident of victory and are pressing ahead with the scheme.

Canary Wharf Group majority owner Songbird Estates said: “A Section 288 objection to the Secretary of State’s decision was filed and a court date has now been set for the case to be heard in December 2014.

“In anticipation of a successful outcome, the joint venture is continuing to work towards completing documentation with Shell; design of the first phase of buildings and tendering of the initial construction packages; and preparation of the marketing and sales campaign for the private residential apartments.”

The 27-storey Shell Centre Tower will remain the centrepiece of the new site, and will continue to be owned and occupied by Shell.

It will be complemented by eight new buildings, one of which will incorporate a further 245,000 sq ft of new offices and trading floors for Shell, enabling all of their 4,000 London-based staff to be located together on the South Bank for the first time.

Around 800,000 sq ft of office space, including the Shell Centre Tower, along with around 80,000 sq ft new retail units, restaurants and cafés, will be accompanied by up to 877 new homes.

The construction, which will run over a six-year period, will employ an average of 700 workers on-site rising to 1,630 at the peak of work.

Link To This Page
1. Click inside the codebox
2. Right-Click then Copy
3. Paste the HTML code into your webpage
codebox
powered by Linkubaitor
Tags: